Create filters creating-filters
When you navigate in the Adobe Campaign tree (from the Explorer menu in the home page), the data contained in the database is displayed in lists. These lists can be configured to display only the data required by the operator. Actions can then be launched on the filtered data. Filter configuration lets you select data from a list dynamically. If the data is modified, the filtered data is updated.
Typology of available filters typology-of-available-filters
Adobe Campaign lets you apply filters to data lists.
These filters can be used once, or you can save them for future use. You can apply several filters at the same time.
The following filter types are available in Adobe Campaign:
-
Default filters
The default filter is accessible via the fields located above the lists. It lets you filter on predefined fields (for recipient profiles, these are the name and email address by default). You can use the fields to enter the characters to filter on or to selection the filter conditions from a drop-down list.
You can change the default filter of a list. For more on this, refer to Change the default filter. -
Simple filters
Simple filters are one-off filters on the columns. They are defined with one or more simple search criteria on the displayed columns.
You can combine several simple filters on the same data list to refine your search. The filter fields are displayed one beneath the other. They can be deleted independently of each other.
Simple filters are detailed in Create a simple filter.
-
Advanced filters
Advanced filters are created using a query or a combination of queries on the data.
For more on creating an advanced filter, refer to Create an advanced filter.
You can use functions to define the content of the filter. For more on this, refer to Create an advanced filter with functions.
note note NOTE For more on building queries in Adobe Campaign, refer to this section. -
User filters
An application filter is an advanced filter that has been saved, to use and share its configuration with the other operators.
The Filters button located above the lists offers a set of application filters that can be combined to refine the filtering. The method for creating these filters is presented in Save a filter.
Change the default filter altering-the-default-filter
To change the default filter for a recipient list, click the Profiles and Targets > Pre-defined filters node of the tree.
For all other types of data, configure the default filter via the Administration > Configuration > Predefined filters node.
Apply the following steps:
-
Select the filter you want to be used by default.
-
Click the Parameters tab and select Default filter for the associated document type.
note caution CAUTION If a default filter is already applied to the list, you need to disable it before applying a new filter. To do this, click the red cross to the right of the filtering fields. -
Click Save to apply the filter.
note note NOTE The filter definition window is detailed in Create an advanced filter and Save a filter.
Create a simple filter creating-a-simple-filter
To create a simple filter, apply the following steps:
-
Right-click the field you want to filter and select Filter on this field.
The default filter fields are displayed above the list.
-
Select the filter option from the drop-down list, or enter the filter criteria to apply (the method for selecting or entering criteria depends on the type of field: text, enumerated, etc.).
-
To activate the filter, press Enter on the keyboard, or click the green arrow to the right of the filter fields.
If the field on which you want to filter the data is not displayed in the form of the profile, you can add it in the columns displayed, then filter on that column. To do this,
-
Click the Configure the list icon.
-
Select the column to be displayed, for example the age of the recipients.
-
Right-click the Age column in the recipient list, and select Filter on this column.
You can then select the age filtering options.
Create an advanced filter creating-an-advanced-filter
To create an advanced filter, apply the following steps:
-
Click the Filters button and select Advanced filter….
You can also right-click the list of data to filter and select Advanced filter….
The filtering condition definition window is displayed.
-
Click the Expression column to define the input value.
-
Click Edit expression to select the field to which the filter will be applied.
-
From the list, select the field on which data will be filtered. Click Finish to confirm.
-
Click the Operator column and select the operator to be applied from the drop-down list.
-
Select an expected value from the Value column. You can combine several filters to refine your query. To add a filter condition, click Add.
-
You can assign a hierarchy to the expressions or change the order of the query expressions using the toolbar arrows.
-
The default operator between expressions is And, but you can change this by clicking the field. You can select an Or operator.
-
Click OK to confirm filter creation and apply it to the list.
The filter applied is displayed above the list.
To edit or modify this filter, click its label.
To cancel this filter, click the Remove this filter icon to the right of the filter.
You can save an advanced filter to keep it for future use. For further information about this type of filter, see Save a filter.
Create an advanced filter with functions creating-an-advanced-filter-with-functions
Advanced filters can use functions; filters with functions are created via an expression editor that lets you create formulas using the database data and advanced functions. To create a filter with functions, repeat advanced filter creation steps 1, 2 and 3, then proceed as follows:
-
In the field selection window, click Advanced selection.
-
Select the type of formula to be used: aggregate, existing user filter or expression.
The following options are available:
-
Field only to select a field. This is the default mode.
-
Aggregate to select the aggregate formula to be used (counts, sum, average, maximum, minimum).
-
User filter to select one of the existing user filters. User filters are detailed in Save a filter.
-
Expression to access the expressions editor.
The expression editor lets you define an advanced filter. It looks like this:
It lets you select fields in the database tables and attach advanced functions to them: Select the function to use in the List of functions. The functions available are detailed in List of functions. Next, select the field or fields concerned by the functions and click OK to approve the expression.
note note NOTE For an example of filter creation based on an expression, refer to this section.
-
Save a filter saving-a-filter
Filters are specific to each operator and are re-initialized each time the operator clears the cache of their client console.
You can create an application filter by saving an advanced filter: it can be re-used by right-clicking in any list or via the Filters button located above the lists.
These filters can also be accessed directly via the delivery wizard, in the target selection stage (refer to this section for more on creating deliveries). To create the application filter, you can:
-
Convert an advanced filter to an application filter. To do this, click Save before closing the advanced filter editor.
-
Create this application filter via the Administration > Configuration > Predefined filters (or Profiles and targets > Predefined filters for recipients) node of the tree. To do this, right-click the list of filters, and select New…. The procedure is the same as for creating advanced filters.
The Label field enables you to name this filter. This name will appear in the combo box of the Filters… button.
You can delete all filters on the current list by right-clicking and selecting No filter or via the Filters icon located above the list.
You can combine filters by clicking the Filters button and using the And… menu.
Filter recipients filtering-recipients
Predefined filters (see Save a filter) enable you to filter the profiles of recipients contained in the database. You can edit filters from the Profiles and Targets > Predefined filters node of the tree. The filters are listed in the upper section of the workspace, via the Filters button.
Select a filter to display its definition and to access a preview of the filtered data.
The predefined filters are:
Examples of how the data is calculated:
-
Selects recipients who are less than 30 years old:
-
Selects recipients who are 18 years of age or older:
-
Selects recipients aged between 18 and 30:
Advanced settings for data filters advanced-settings-for-data-filters
Click the Settings tab to access the following options:
-
Default filter for the associated document type: this option lets you suggest this filter by default in the editor of the lists concerned by the sort.
For example, the By name or login filter is applied to operators. This option is selected, and so the filter is always offered on all operator lists.
-
Filter shared with other operators: this option lets you make the filter available to all the other operators on the current database.
-
Use parameter entry form: this option lets you define the filter field(s) to be displayed above the list when this filter is selected. These fields let you define the filter settings. This form must be entered in XML format via the Form button. For example, the preconfigured filter Recipients who have opened, available from the recipients list, displays a filter field that lets you select the delivery at which the filter is aimed.
The Preview button displays the result of the selected filter.
-
The Advanced parameters link lets you define additional settings. In particular, you can associate a SQL table with the filter to make it common to all editors that share the table.
Select the Do not restrict the filter option if you want to stop the user from overriding this filter.
This option is enabled for “Recipients of a delivery” and “Recipients of deliveries belonging to a folder” filters offered in the delivery wizard that cannot be overloaded.
